Professionally installed epoxy countertops cost $50 to $150 per square foot, or $1,500 to $6,000 for an average 30-to-40-square-foot kitchen — figures both Angi and HomeGuide publish12. Angi’s framing: most homeowners don’t buy brand-new epoxy countertops — they refinish an existing surface, which runs $4 to $8 per square foot for materials, with most spending $100 to $1,000 on the average refinishing project1; Fixr puts the national average for professional countertop refinishing at $300 to $500, with $400 typical for 60 square feet of quartz finished with epoxy coating3. A DIY epoxy resin kit costs $100 to $350 and saves $45 to $140 per square foot in labor (HomeGuide)2. Figures below are the latest published data from each source.
Three ways to get epoxy countertops
The sources split epoxy projects into three distinct routes, each with its own price band:
- New pour, professionally installed: $50 to $150 per square foot, or $1,500 to $6,000 for an average kitchen (Angi, HomeGuide)12. A 35-square-foot kitchen runs $1,750 to $5,250 (Angi)1.
- Refinishing an existing counter: $4 to $8 per square foot for the epoxy materials, with most homeowners spending $100 to $1,000 on the average project, or $2,000 to $7,000 for professional epoxy countertop refinishing (Angi)1. Fixr’s professionally applied epoxy coating is also priced at $4 to $8 per square foot — the same band Angi publishes, but Fixr’s is installed while Angi’s covers materials only13.
- DIY kit: $100 to $350 depending on counter size, tools and material quality, saving $45 to $140 per square foot in labor (HomeGuide)2.
Cost by room and countertop size
Angi’s room-by-room estimates1:
| Room | Countertop size | Average cost (Angi) |
|---|---|---|
| Small kitchen | 20–30 sq ft | $1,000–$4,500 |
| Average kitchen | 30–40 sq ft | $1,500–$6,000 |
| Large kitchen | 40–60 sq ft | $2,000–$9,000 |
| Double bathroom vanity | 10–12 sq ft | $500–$1,800 |
| Single bathroom vanity | 5–10 sq ft | $250–$1,500 |
Labor and design complexity
Labor dominates this material. Both Angi and HomeGuide price installation labor at $45 to $140 per square foot12, and HomeGuide’s stated reason is that epoxy is messy and difficult to work with, so most of the total cost comes from labor fees2. Design choices move the number too: Angi notes epoxy is poured by hand, so a marble-like finish means the contractor spends time creating the veins, pushing labor toward the high end of the range1. Angi’s money-saving suggestions follow from the same logic: shrink the square footage, skip time-consuming details like veining, and lump similar projects together to save on labor1.
Common add-on projects
If you’re already hiring a pro, Angi lists average prices for related upgrades homeowners often bundle with a countertop job1:
| Add-on project | Average cost (Angi) |
|---|---|
| Backsplash installation | $600–$1,300 |
| Faucet replacement | $400–$900 |
| Sink replacement | $225–$1,600 |
| Cabinet refinishing | $1,800–$4,200 |
| Cabinet refacing | $4,500–$10,600 |
| New cabinet hardware | $5–$30 per piece |
| Installing new appliances | $125–$300 plus the cost of the appliance |
Durability, care and the fine print
HomeGuide’s pros list covers durability, heat and scratch resistance, and a wide variety of colors and designs; its cons are a difficult, time-consuming installation, inconsistent quality between manufacturers, and proneness to stains2. Angi adds useful specifics: epoxy is heat-resistant but not heatproof — it typically withstands 135°F to 300°F, while cookware straight from a stove or oven can reach 300°F to 500°F and can melt, soften or discolor the surface, so trivets are mandatory1. Angi puts the average lifespan at around 10 years, longer with proper maintenance, and prices typical countertop repairs at $225 to $5501. One outdoor caveat from HomeGuide: standard epoxy is durable enough for outdoor use but tends to turn yellow under UV exposure, so choose a UV-resistant brand or use special additives outdoors2.
Epoxy vs granite and quartz
Both comparison guides land in the same neighborhood: Angi prices most granite at $75 to $145 per square foot installed, with high-end varieties topping $1851, while HomeGuide puts granite at $80 to $150 and quartz at $50 to $200 per square foot2. HomeGuide’s summary: epoxy is cheaper and easier to maintain than granite but harder to install than a stone slab2. Compare pricing in our guides to granite countertops, quartz countertops, concrete countertops, tile countertops, and laminate countertops, or start with countertop installation cost. For garage and basement floors, see epoxy floor cost.
Do you need a permit?
Whether a countertop project needs a permit depends on your local building authority and the full scope of the work, so confirm requirements with your local building department before work starts. For budgeting, Angi prices building permits at $50 to $500 depending on the work and the rules of the local municipality1.
DIY epoxy: the kit route
Both sources sell the same caution in different words. HomeGuide prices DIY epoxy resin kits at $100 to $350 and says working with resin is difficult and should only be attempted by experienced DIYers; its technique tips include applying a thin “flooding” layer first to minimize bubbles and using a hair dryer to pop any that appear2. Angi calls the material extremely challenging to install and warns it’s unforgiving: you only get one shot at your desired pattern. Its listed ways to trim pro labor include handling the prep yourself — cleaning, filling chips, removing hardware, and masking the area1. Angi’s verdict on budget: epoxy isn’t typically a budget-friendly countertop unless you’re using it to refinish a surface or DIY the job1. If you go the kit route, Home Depot’s countertop epoxy category shows current kit and materials pricing.
The bottom line
Budget $50 to $150 per square foot for a professionally installed epoxy countertop, or $1,500 to $6,000 for an average kitchen. Refinishing an existing counter is the cheaper path — $4 to $8 per square foot in materials, a $300 to $500 national average for a professional refinish (Fixr) — and a $100 to $350 DIY kit removes the labor cost entirely, provided you’re an experienced DIYer with patience for a one-shot pour. Get at least three itemized quotes, and ask each contractor how they handle veining, bubbles and surface prep.
Sources (each fetched and read October 26, 2026; figures are each publisher’s latest published data):
1. Angi, “How Much Do Epoxy Countertops Cost? [2026 Data]” (updated July 15, 2026) — angi.com/articles/epoxy-countertops-cost.htm
2. HomeGuide, “2026 Epoxy Countertops Cost, Pros & Cons, and Comparison” (page dated November 29, 2023) — homeguide.com/costs/epoxy-countertops-cost
3. Fixr, “Countertop Refinishing Cost” (updated January 31, 2025) — fixr.com/costs/refinish-countertop
Related guides
Countertop Refinishing Cost: 2026 Resurfacing, Repair and DIY Prices