Fascia is the horizontal board along the roofline that holds the gutters, and repairs are usually priced per linear foot. HomeGuide puts fascia board repair at $5 to $12 per linear foot2 and Fixr at $6 to $16 per linear foot3; full fascia replacement runs higher because it adds removal and labor. Totals depend on damage extent, material, and roof access.
Ladder safety before any fascia work
Fascia sits at the roofline, so inspection and repair mean working from a ladder. The CDC notes that many ladder injuries happen at home and lists five major causes of ladder falls; in about 40% of cases the ladder slides out at the base from an incorrect setup angle, and it advises setting extension ladders at about a 75-degree angle4. On multi-story homes or steep roofs, hiring a professional avoids the ladder work entirely.
Fascia repair cost per linear foot
Per-foot pricing differs by what each publisher measures. HomeGuide reports fascia board repair at $5 to $12 per linear foot, with fascia repair or replacement totaling $500 to $2,400 on average one-story homes2. Fixr reports fascia repair at $6 to $16 per linear foot and full fascia replacement, including labor, at $15 to $20 per linear foot3. Angi reports fascia repair by material:1
| Fascia material | Angi repair cost (per lin. ft) |
|---|---|
| Wood | $1 – $3 |
| Vinyl | $5 – $8 |
| Aluminum | $8 – $20 |
Material figures as published by Angi; the page does not state whether labor is included in these per-foot rates.
Whole-eave repair totals
Fascia is often repaired together with the soffit (the underside of the eave), and publishers report combined eave totals with different scopes:231
| Source | Figure as published (per project unless noted) | Scope as stated |
|---|---|---|
| HomeGuide | $1,500 (project total) | National average, roof eaves repair |
| HomeGuide | $500 – $2,600 (project total) | Average range, roof eaves repair (replace rotted fascia/soffit sections, fix rafter tails, or painting) |
| HomeGuide | $9 – $34 per lin. ft | Soffit + fascia replacement |
| HomeGuide | $900 – $6,800 (project total) | Soffit + fascia replacement, total |
| Fixr | $900 (project total) | National average: replace a 30 lin. ft wooden soffit and fascia section damaged by moisture or insects |
| Fixr | $460 – $1,330 (project total) | Average range, eaves repair |
| Fixr | $180 (project total) | Low end: replace improperly installed fasteners on 30 lin. ft |
| Fixr | $9,000 (project total) | High end: replace 300 lin. ft of rotted wooden eaves |
These are separately published publisher estimates with differing scopes and ranges.
Discrepancy note: Angi's page states soffit and fascia repair jobs cost between $600 and $6,000 in its body text, while its cost-insights summary states $300 to $7,200 for the same repairs. Both figures are reported as published; Angi does not reconcile them on the page1.
Damage type and related work
Angi reports that repairing water damage from clogged gutters or poor roof drainage costs $10 to $23 per linear foot, while dry rot repair runs $500 to $4,000 depending on extent1. Fixr notes that rafter tails behind the fascia can also rot, with rafter tail repair averaging $3 to $12 per board foot3; HomeGuide puts rafter tail or rotted-eaves repair at $650 to $4,000 in total2.
Related work publishers price alongside fascia repair:1
| Related item | Angi figure as published |
|---|---|
| Drip edge, installed | $1 – $2 per lin. ft |
| Gutter replacement | $100 – $1,100 per gutter (type and removal difficulty dependent) |
| Painting fascia and soffit | $2.50 – $6.50 per lin. ft |
| Roofer / carpenter labor | $40 – $80 per hour; hard-to-reach boards add 7% – 15% |
Repair or replace
Angi reports that minor damage such as small holes or dislodged boards can sometimes be patched or rehung, while water damage, dry rot, and significant cracks usually mean replacing the affected section1. Fixr similarly describes localized cracks or holes as patchable and widespread rot as a replacement job, and recommends a carpenter or roofer inspect the full run to find the root cause3. Because the work happens at the roofline, none of the publishers treat fascia repair as a typical DIY project.