Gate installation costs $2,322 on average, with most homeowners paying $877 to $3,814.1 Driveway gates alone average $4,000 installed, since they are wider and often automated.2 Prices below are national averages* for 2026.

*National averages, not local quotes. Your price depends on gate size, material, automation and local installer rates.

$2,322

average, all gates (Angi)

$4,000

average driveway gate (Fixr)

$200–$2,500

DIY gate kit (Angi)

$50

installer hourly rate (Angi)

What sources say

Source Figure Notes
Angi $2,322 average, $877 – $3,814 541 verified projects; covers all gate types
Fixr $4,000 average, $1,000 – $6,000 Driveway gates only; $400 low end, $12,000 high end
Bob Vila $2,337 average, $875 – $3,823 Explicitly cites Angi and HomeAdvisor data

Bob Vila’s figures are drawn from Angi and HomeAdvisor, so they are the same dataset, not independent confirmation. Fixr is the outlier with a $4,000 average, but its scope is narrower: driveway gates only, which run wider and more often automated than yard or fence gates. Read Angi’s average as “any gate” and Fixr’s as “driveway gate”.1,2,3

Cost by gate material (Angi)

Material Installed cost
Chain-link $200 – $1,000
Vinyl $200 – $1,000
Wood $400 – $8,500
Steel $600 – $8,500
Wrought iron $1,500 – $5,000
Aluminum $2,000 – $8,500

Ranges span small walk-through gates up to full driveway gates. Most gates 4 to 8 feet wide cost $200 to $800 installed.1

Driveway gates: manual vs. automatic (Fixr)

Operation Installed cost
Manual $700 – $3,000
Automatic $2,500 – $5,000

Angi splits the same idea differently: manual driveway gates at $300 to $1,200 depending on materials, and automatic installs at $1,900 to $6,000.1 The opener mechanism itself runs $500 to $9,000 depending on type.2

Driveway gate width (Fixr, manual gates)

Width Cost
10 ft $200 – $2,000
12 ft $300 – $3,400
14 ft $500 – $3,600
16 ft $700 – $4,000

Extras that move the budget

Item Cost Source
Hinges, locks, handles, posts $100 – $1,500 Angi
Cameras, intercoms, keypads, opener $1,000 – $6,500 Angi
Labor $50 per hour; $200 – $300 for a typical single gate (4 – 6 hours) Angi
Security gate package $3,000 – $12,000 installed Angi

DIY or hire

A prepackaged kit from a home improvement store is the budget route at $200 to $2,500, and Angi figures DIY saves roughly the $200 to $300 labor on a simple gate.1 Replacing an existing gate with the same model is a straightforward swap; setting posts, hanging a heavy custom gate or wiring an opener is pro work. The Home Depot driveway gates category shows current pricing, including openers.

Related guides

Fence Repair Cost
Fence Cost Calculator
Garage Door Opener Installation Cost
All cost guides

Sources
1. Angi — Gate Installation Cost
2. Fixr — Driveway Gate Installation Cost
3. Bob Vila — Driveway Gate Cost