Hot tub repair costs an average of $350, with a published normal range of $181 – $567, according to Angi and HomeAdvisor.1,2 The corporate siblings publish the same average and normal range; matching figures between the sibling sites alone don’t establish independent corroboration.1,2 Fixr (updated January 2025) separately reports a national average of $250, scoped to repairing a hot tub motherboard, within an average range of $160 – $400, a low end of about $100 to replace a jet, and a high end of around $1,500 to repair a major leak involving piping and the tub cabinet.3 Fixr’s figures are separately published, and the pages state no shared sourcing; the averages ($350 versus $250) and ranges differ without explanation. Prices below are national averages*.
*National averages, not local quotes. Your price depends on the repair type, parts needed, and local labor rates.
$350
average (Angi/HomeAdvisor)
$181–$567
normal range (Angi/HomeAdvisor)
$250
average, motherboard repair (Fixr)
$160–$400
average range (Fixr)
What the sources say
| Source | Headline figures | Notes |
|---|---|---|
| Angi (2026 data, updated Oct 2026) | $350 average; most homeowners $181 – $567; low $100; high $800 | Corporate sibling of HomeAdvisor; headline figures match HomeAdvisor’s |
| HomeAdvisor (2026 data, updated Jun 2026) | $350 average; normal range $181 – $567; low $100; high $800 | Sibling-published figures match Angi’s; matching figures alone don’t establish independent corroboration. HomeAdvisor’s body text also states an overall span of $95 – $900; the narrower $181 – $567 figure is its labeled normal range |
| Fixr (updated Jan 2025) | $250 average scoped to repairing a hot tub motherboard; average range $160 – $400; low about $100; high about $1,500 | Separately published, pages state no shared sourcing; average and range differ from the sibling figures without explanation |
Cost by repair type (Angi)
Angi prices common hot tub repairs as follows:1
| Repair type | Average cost (Angi) |
|---|---|
| Heater | $200 – $700 |
| Pump | $300 – $1,000 |
| Leak | $200 – $1,500 |
| Shell | $300 – $1,200 |
| Plumbing | $150 – $500 |
| Electrical | $100 – $450 |
Angi breaks two components down further: heater repair at $200 – $400 versus full replacement at $400 – $700, and pump repair at $300 – $400 versus replacement at $400 – $1,000. For leaks, it prices minor leaks at $200 – $500 and severe or hard-to-find leaks at up to $1,500.1
Cost by repair type (HomeAdvisor)
HomeAdvisor publishes its own repair-type table, plus a heater-replacement figure in its text:2
| Repair type | Average cost (HomeAdvisor) |
|---|---|
| Motor and pump | $200 – $1,200 |
| Jets | $75 – $300 |
| Blower | $175 – $450 |
| Frame and cabinet | $60 – $125 |
| Leak repair | $25 – $1,500 |
| Circuit board | $200 – $700 |
| Heater (replacement) | $225 – $650 |
Cost by repair type, part, and problem (Fixr)
Fixr prices hot tub work three ways, all including labor:3
By type of repair:
| Type of repair | Cost (labor included) |
|---|---|
| Cover | $50 – $75 |
| Hard water treatment | $50 – $100 |
| Hole in tub | $100 – $250 |
| Heater | $150 – $300 |
| Cabinet | $150 – $400 |
| Circuit board | $150 – $450 |
| Motherboard | $150 – $450 |
| Pump | $200 – $500 |
| Frozen pipes | $200 – $500 |
| Leak | $250 – $1,500 |
By replacement part:
| Replacement part | Cost (labor included) |
|---|---|
| Jet | $50 – $200 |
| Filter | $75 – $400 |
| Cover | $75 – $500 |
| Diverter valve | $100 – $200 |
| Pressure switch | $100 – $250 |
| Light | $100 – $250 |
| Thermostat | $125 – $250 |
| Foam insulation | $200 – $400 |
| Heater | $200 – $700 |
| Motor | $250 – $1,000 |
| Pump | $250 – $1,000 |
| Circuit board | $350 – $1,000 |
By problem:
| Problem | Cost (labor included) |
|---|---|
| Filtration system not working | $75 – $500 |
| Leaks when jets are on | $100 – $750 |
| Jets not working | $100 – $1,000 |
| Will not turn on | $150 – $1,000 |
| Not heating | $150 – $1,000 |
| Motor humming | $200 – $1,000 |
| Motor not working | $250 – $1,000 |
All three sources put the top end of leak repair at $1,500 (separately published figures with no stated shared sourcing), with differing low ends. Fixr’s heater replacement row of $200 – $700 numerically matches Angi’s heater table span, but Angi splits its span into repair ($200 – $400) and replacement ($400 – $700) scopes, so the rows are not same-scope figures; HomeAdvisor’s heater replacement is $225 – $650.1,2,3
Labor costs
HomeAdvisor and Fixr both report hot tub repair labor at $75 – $125 per hour, and both report a minimum service or diagnostic fee of $100 – $200 (separately published figures with no stated shared sourcing; HomeAdvisor notes its fee covers the first hour, and Fixr notes its diagnostic fee is typically discounted if you hire the same worker for the repair).2,3 HomeAdvisor puts total labor at $75 – $750 depending on complexity.2 Angi separately reports $75 – $150 per hour, with emergency or after-hours service adding 20% – 50% to the bill.1
Add-ons and related work
Angi prices common add-ons scheduled alongside a repair: cover replacement at $300 – $800, filter changes at $75 – $500, water treatment at $50 – $150, and insulation upgrades at $200 – $500.1 Fixr prices a new hot tub heater unit at $100 – $400.3
Repair or replace?
Angi puts the average repair at $350 against $2,000 – $11,000 for a new hot tub installation.1 Fixr separately puts a new hot tub installation at $4,000 – $8,500.3 See our guides to hot tub installation and hot tub costs for new-unit pricing.
Related projects
See our guides to hot tub costs, hot tub installation, pool heater repair, and pool pump repair for those projects.
Frequently asked questions
How much does hot tub repair cost?
Angi and HomeAdvisor report an average of $350, with a normal range of $181 – $567. Fixr separately reports an average of $250 scoped to repairing a hot tub motherboard, within an average range of $160 – $400.1,2,3
How much does it cost to fix a hot tub leak?
All three sources put the top end of leak repair at $1,500: Angi reports $200 – $1,500, HomeAdvisor $25 – $1,500, and Fixr $250 – $1,500 (separately published figures with no stated shared sourcing). Angi prices minor leaks at $200 – $500.1,2,3
How much does it cost to replace a hot tub pump?
HomeAdvisor reports $200 – $1,200 for motor and pump work. Angi reports pump repair at $300 – $400 and replacement at $400 – $1,000. Fixr prices a pump replacement at $250 – $1,000 including labor.1,2,3
How much does a hot tub heater cost to repair or replace?
Angi reports heater repair at $200 – $400 and replacement at $400 – $700. HomeAdvisor reports heater replacement at $225 – $650. Fixr prices heater repair at $150 – $300, replacement at $200 – $700 including labor, and a new heater unit at $100 – $400.1,2,3
Related guides
Hot Tub Cost
Hot Tub Installation Cost
Pool Heater Repair Cost
Pool Pump Repair Cost
All cost guides
Sources
1. Angi — How Much Does Hot Tub Repair Cost? (2026 data)
2. HomeAdvisor — How Much Do Hot Tub Repairs Cost? (2026 data)
3. Fixr — Hot Tub Repair Cost (updated Jan 2025)